Print Page | Close Window

connecting kenwood KAC-649S and KAC-9152D

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79591
Printed Date: September 10, 2025 at 9:49 PM


Topic: connecting kenwood KAC-649S and KAC-9152D

Posted By: j3ja
Subject: connecting kenwood KAC-649S and KAC-9152D
Date Posted: June 25, 2006 at 2:35 AM

hi,

i have an existing amp Kenwood KAC-649S 320 watts max power (powering my mains 2 front + 2 rear).

I recently bought a Kenwood KAC-9152D 1800 watts max power and KFC-W3514DVC sub. My idea is to connect the LINE OUT of the KAC-649S to the LINE IN of the KAC-9152D to get the signal.

Is this the proper way to connect the 2 amps? Any suggestions pls. Thank you.



-------------
rej



Replies:

Posted By: geepherder
Date Posted: June 25, 2006 at 7:15 PM
If your deck has sub preouts, I'd use those instead.  If not, you can do it the way you described or just use some rca splitters off the front or rears.

-------------
My ex once told me I have a perfect face for radio.


Print Page | Close Window