SPL Tuning

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79603
Printed Date: June 09, 2024 at 7:43 AM

Topic: SPL Tuning

Posted By: Soundforce
Subject: SPL Tuning
Date Posted: June 25, 2006 at 1:01 PM

Hello i've got a pegaute 206 ( 5 doors ) and i want to make an spl box for two pioneer TS-W306C if anyone can help me pls tell me what i have to do to make this subs hit db. The hole car i covered with dynamat and i very isolated. My amp. is 700Wrms. Is better to build an vented enclosure or an pandpass enclosure? Please reply to my topic,your help is nedeed!

Replies:

Posted By: stevdart
Date Posted: June 25, 2006 at 1:29 PM

Here's a guide to a program that will help you set up your SPL car. You want to design the box so that you have the ability to fine tune the box tuning (port length) so that it maximizes your car's natural frequency. And this has to be done after the build. Take your time. It's not uncommon for competitors to go through several variations of the build to hit max SPL.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window