new setup?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79646
Printed Date: May 16, 2025 at 7:51 PM

Topic: new setup?

Posted By: theyoungone
Subject: new setup?
Date Posted: June 26, 2006 at 1:40 PM

Im gonna run two Kicker S10l5's DVC, Not sure on the ohms, it can be 2 or 4, but i need to know what would work the best with the kenwood 1800 Watt KAC-9152D, It'll run 2 or 4 ohm, and is 1 ohm stable, i just need to know what my best route would be, thanks

-------------
I @m a B@D []D.[].[]\/[].[]D

Replies:

Posted By: theyoungone
Date Posted: June 27, 2006 at 11:45 AM

Anyone? another question, if thats not the best amp for me, what amp should i buy to power those subs, they are oficially 4 0hm dvc

-------------
I @m a B@D []D.[].[]\/[].[]D

Posted By: aznboi3644
Date Posted: June 27, 2006 at 4:13 PM

Dual 4 ohms or dual 2 will work...With dual 4's you can wire it down to 1 ohm or with dual 2's you can wire it down to 2 ohms.

Either way it'll push max power. That amp is rated the same power for 2 and 1 ohms right?

Posted By: aznboi3644
Date Posted: June 27, 2006 at 4:18 PM

That amp will do fine...If you can spend the cash a Memphis 1000D is a wonderful that runs cool as hell at 1 ohm.

Print Page | Close Window