Print Page | Close Window

high pass crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79675
Printed Date: May 07, 2024 at 7:17 PM


Topic: high pass crossover

Posted By: dan.murray
Subject: high pass crossover
Date Posted: June 27, 2006 at 2:29 AM

Hi guys, I want to add tweeters with a crossover for each of my front speakers, OR, as i am not using any of the speaker outs of the head unit i can use those to separatley power the tweeters. I know next to nothing about cross overs, so i will need extensive and detailed help.....the speakers are rated at 6 watts @ 4 ohms, i will be running two off each crossover (4 in total) so the specs of the xover need to accomodate 12W@8ohms ..the other thing is , i dont know what frequency i want the to run off...oh and also can i step down the wattage from the 50W coming from the head unit to 12W? ...in essence, what i am ultimatley asking for is a HOW-TO o nbuilding these xovers...and if they are even possible.

Thanks in advance...and i apologise for the lack of knowledge in this area.



-------------
It's all about bass



Replies:

Posted By: stevdart
Date Posted: June 27, 2006 at 5:39 AM
Start here.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Print Page | Close Window