wiring an amp

Hey guys I got 2  12 inch alpine Type R Subs(1242D) in a sealed box, i have them wired into a 2 ohm now, I also have a mtx 500d(2) one for each sub, my question is since i have 4 speaker wires coming from the amp, and I only have on jack for each sub, how do i wire the amps speaker outputs, do i do the amp speaker wires the same as i did the subs

Let me see if I understand what your saying.

• You have two subs in a sealed box.  Are they in separate chambers?  This should be done because you are powering each sub with a separate amplifier.
• You have two D-class mono amps, one for each sub.
• Each sub is a dual 4 ohm model and wired to 2 ohms each.
• Each sub has wires that terminate at a jack plate on the box.  So the box has two separate terminal cups.
• The amps have dual speaker connection availablity.

If so, use only one set of terminals on each amplifier for speaker hookup.  Wire sub A to amp A, pos and neg to one set of terminals.  Do the same with sub and amp B.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Thanks