Anybody got a complete set of those? I can get em... just don't want to pull my gear out to spec one woofer. It's the MR10.4... the one with the neo magnet structure, aluminum cone, and the "Chroma Flair" paint job... I found some, but I was hoping to get some more complete specs, as JBL wants more than I have for more accurate figuring...
Was hoping to build an A-#1 BITCHINEST multimedia subwoofer with it... a 10 inch with a 15 in PR... what'ya think? <grin>
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Mr. Choong Keat Yiang supplied this database for WinISD Pro and that is where I found it. I presume that Mr. Choong was careful with this input:
auramr-10.4specs.jpg
auramr-10.4advspecs.jpg
auramr-10.4defaultvented.jpg
He may have interpreted Xmax to be two-way with that figure. Also, I gave the "consistency check" through WinISD's auto-calculate a try with that database, and it failed in every category possible. If it were me, I would work the auto-calculate on these and see if several things are off by just a few hundredths or thousandths.
Update: I entered those numbers (except I used 25.4mm for Xmax) into Unibox to see how it figured Mms etc and it came out about the same.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Hands down the most beautiful drivers I have ever seen.
I'd almost feel like I had to inverse mount them because it would be a sin to hide their amazing backsides. (That just sounds wrong)
Aura has a complete pdf spec sheet on their site also, not sure if you still need it.
https://www.aurasound.com/
