memphis setup

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80155
Printed Date: May 10, 2025 at 9:58 AM

Topic: memphis setup

Posted By: hcabrera
Subject: memphis setup
Date Posted: July 11, 2006 at 1:45 AM

ok what do you guys think car 2006 hyundai tiburon i have 2 memphis 250d one epicenter one memphis line driver one memphis parametric eq one epicenter kenwood excelone head unit memphis distrubution block 2 memphis pr124d slot ported box. but i have slight engine whine what could it be? also it states that my amps can only accept 4guage wire is this true or could i put 2guage wire on them? also is xstatic better then putting in an efy dry cell battery and a capacitator? thanks

Replies:

Posted By: josh1979
Date Posted: July 11, 2006 at 9:30 AM

the questions u ask would take pages of troubleshooting so i found this site it shoul be able to answer all of you questionsit was riten by David Navone of Autosound 2000. he knows his troubleshooting. https://www.mr2.com/FAQ/rac-faq_2.html

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english

Print Page | Close Window