Bridging to one 12" only
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80202
Printed Date: May 13, 2024 at 10:01 PM
Topic: Bridging to one 12" only
Posted By: beaner420
Subject: Bridging to one 12" only
Date Posted: July 12, 2006 at 1:49 PM
Hey. I have a Sony XPLOD 800 watt amp that is hooked up to two 12"s. It does not sound as good as I have hoped so I want to bridge it to the JL that i have. How do I go about and do this? Any help is greatly appreciated.Thanks
Replies:
Posted By: mech3
Date Posted: July 12, 2006 at 2:00 PM
You want to bridge one JL 12" to the xplode amp, or you want to bridge a single 12" to a jl amp? Can you give a little more info. Do you know the impedance of the 12" sub you want to bridge (2-ohm, 4-ohm)?
-------------
No, I don't take steriods- But thanks for asking!
Posted By: aznboi3644
Date Posted: July 12, 2006 at 4:04 PM
Like mech said...more info..
From what you said...You want to bridge IT (meaning the sony amp to the subs) or do you want to bridge THEM (meaning the subs to the JL amp?)
|