1995 Toyota Tercel stereo wiring
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80253
Printed Date: May 03, 2024 at 2:09 AM
Topic: 1995 Toyota Tercel stereo wiring
Posted By: kirusshan
Subject: 1995 Toyota Tercel stereo wiring
Date Posted: July 13, 2006 at 12:15 PM
i dont have a factory deck installed. i was wondering how do u install the wires to put a cd deck in it.
Replies:
Posted By: kirusshan
Date Posted: July 13, 2006 at 5:36 PM
there is nothing that i can connect the wire harness to
Posted By: geepherder
Date Posted: July 13, 2006 at 6:29 PM
So you're saying there's no unused plug taped up behind the dash or anything? If that's the case, you can run all new wires. Run speaker wires directly from the radio cavity to all your speaker locations. Using a multimeter, test the wires at the ignition harness for constant and accessory power. Run a wire from each of these (with an inline fuse as close to your connections as possible) to the radio cavity. Then find a decent ground (maybe a piece of metal behind the dash), crimp a ring terminal onto a length of wire, screw it down and run this to the radio cavity. That's all you'll need, if you want to run an illumination wire, just tap into the parking light wire.
-------------
My ex once told me I have a perfect face for radio.
Posted By: Flakman
Date Posted: July 13, 2006 at 6:47 PM
No stock radio...does that mean no stock speakers either?
-------------
The Flakman
I feel strange. I have deja vu and amnesia at the same time.
John | Manteca, CA
Posted By: kirusshan
Date Posted: July 13, 2006 at 7:09 PM
no stock speakers. this is gonna be the biggest b**** to get to work unless i pay someone.
Posted By: kirusshan
Date Posted: July 13, 2006 at 10:37 PM
this might sound pretty dumb but if anyone has a diagram or picture can they help. im uploading pictures in this reply to show u the inside. still wondering if the connector for the wire harness is in that black thing on the third link.
https://img231.imageshack.us/img231/7480/imgp1577medium5pa.jpg
https://img204.imageshack.us/img204/9919/imgp1578medium0gy.jpg
https://img131.imageshack.us/img131/3725/imgp1579medium3fp.jpg
Posted By: forbidden
Date Posted: July 14, 2006 at 12:57 AM
Some of these vehicles did indeed have zero wiring in them for a audio system. To me it appears that you will indeed be running all new wiring. No stock stereo = no stock speakers as well. Based on your pics, you do not need to buy the pocket or harness mentioned above. You also DO NOT NEED TO CUT THE DASH. The new cd player will mount directly to the mounting holes of the factory radio mounting brackets that are attached to the factory pocket and blankout plate in the first pic. This is called a ISO mounting system. It is the best and most secure method of mounting a cd player in a vehicle and I will that other companies would follow suit.
-------------
Top Secret, I can tell you but then my wife will kill me.
|