10" in sealed box
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80455
Printed Date: May 13, 2024 at 1:16 AM
Topic: 10" in sealed box
Posted By: ecxtimmy
Subject: 10" in sealed box
Date Posted: July 18, 2006 at 6:40 PM
I just put my RF punch 104 sub in my small truck box. I noticed that it leaked around the edges, and the sound wasn't that great, so I put foam around the edge to seal it. Its alot louder now, but i know your supposed to put silicon around the edge, and the back where the wire terminals are, but where do i get the correct silicon and is it required, or will it make that much of a difference. Also, if I want to remove the sub, or get a new one, how hard is it to take the sub out, and if I take it out, will it damage the box
Replies:
Posted By: jeffchilcott
Date Posted: July 18, 2006 at 6:46 PM
You can use about any kind of RTV silicon/ caulk Its best to use Waterproof, as it sleals better in my oponion, you can get it at any hardware store.
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: ecxtimmy
Date Posted: July 18, 2006 at 6:59 PM
how much does silicon stuff cost
Posted By: killer sonata
Date Posted: July 18, 2006 at 7:19 PM
just use a hot glue gun. Im sure your mom has one laying around somewhere. atleast most do. lol.
-------------
"People with mullets live 40% longer" - Ricky Bobby
|