Print Page | Close Window

building a crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80766
Printed Date: August 27, 2025 at 5:54 AM


Topic: building a crossover

Posted By: mech3
Subject: building a crossover
Date Posted: July 25, 2006 at 9:38 PM

Could someone please point me somewhere where I can get some info on building a crossover network. I have a set of components that I want to push 2.5khz and above to the tweets, then the rest to the mids. Also This may be a stupid question but how does a crossover take say a 4ohm tweeter and a 4ohm mid bass driver and still keep a 4ohm load at the amp?

Any info would be great

Thanks Fella's



-------------
No, I don't take steriods- But thanks for asking!



Replies:

Posted By: DYohn
Date Posted: July 25, 2006 at 11:57 PM

Here's a good place to start.

https://www.the12volt.com/caraudio/cross.asp



-------------
Support the12volt.com


Print Page | Close Window