sound deading material?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80971
Printed Date: April 28, 2024 at 1:14 AM
Topic: sound deading material?
Posted By: stormraider04
Subject: sound deading material?
Date Posted: July 30, 2006 at 4:27 PM
My dad is a contractor and has some extra Bituthene. it is a self adhered waterproofing membrane. i was wondering if that will work for a sound deading material for my truck? Or would i just be better off going with RAAMmat BXT or second skins damplifier or damplifier pro?
Replies:
Posted By: luckydevil
Date Posted: July 30, 2006 at 11:07 PM
Sounds like a product similar to Peel-n-Seal. A lot of people have had very good results using the forementioned. Check to see how strong the adhesive is and also how strong of a smell it has when it gets warm. The smell of asphalt may not be appealing.
Posted By: OCURIEL
Date Posted: August 02, 2006 at 1:05 PM
Raammat is the best quality product on a budget.
Posted By: stick42
Date Posted: August 02, 2006 at 5:16 PM
I have used it before, years ago. Works great, no smell, but verrrry sticky, be careful not to get on carpet etc.. will not come off. Should be excellent for you, escpecially since you can get it for next to nothing from your dad.
Posted By: stormraider04
Date Posted: August 03, 2006 at 2:45 AM
well im going to see if i need and sound deading and if i do i think i might just be safe and go with raammat. thanks for the input
|