Print Page | Close Window

chrysler factory stereo

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81575
Printed Date: May 16, 2025 at 4:50 AM


Topic: chrysler factory stereo

Posted By: zapgap
Subject: chrysler factory stereo
Date Posted: August 13, 2006 at 4:48 PM

I have a mid-90s chrylser factory stereo that was removed from the vehicle to install after aftermarket upgrade.  I want to use it as my shop radio but i can't get it working.  I have the speakers hooked up correctly, ground hookedup, and plus 12 to the power pin and the ignition pin.  I can get scratching noises in the speakers when turn the balance and fade controls etc and on applying the 12 volts to the ignition pin but the display will not fire up and cannot tune anything etc.  Is there a secret procedure or a security code on these things i need to apply or some other ideas to get me going thanks

zapgap



-------------
zapgap



Replies:

Posted By: saxdogg
Date Posted: August 13, 2006 at 7:26 PM

This ? may be stupid, but was it removed because it didn't work?

JP


Print Page | Close Window