rf t3002
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81582
Printed Date: May 03, 2024 at 12:37 PM
Topic: rf t3002
Posted By: furflier
Subject: rf t3002
Date Posted: August 13, 2006 at 6:24 PM
I just aquired a rf t3002 power amp. It came with the bass knob, but no cable. My question is can I use a standard network cable? According to rf site the cable is a non flipped 8 pin cable. If I understand this correctly I would not have to cross any wires as in a cross over cable. Am I correct in thinking this was or not?
-------------
Replies:
Posted By: haemphyst
Date Posted: August 14, 2006 at 7:13 AM
That should be right. As long as you are wired "straight through", it'll work.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: furflier
Date Posted: August 14, 2006 at 11:51 AM
Thanks for the response, will be hooking it up within the next day or so.
-------------
|