1100 watt amp with 6 channels

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81868
Printed Date: May 15, 2025 at 3:41 PM

Topic: 1100 watt amp with 6 channels

Posted By: matt1989
Subject: 1100 watt amp with 6 channels
Date Posted: August 21, 2006 at 1:29 PM

i have just started out on car audio systems and i have bought a 1100watt amp with six channels and am looking to run 3 subs off of it. but i do not know how to do this. would anybody hav any info at all?. thanks

-------------
matthew

Replies:

Posted By: Flakman
Date Posted: August 21, 2006 at 1:36 PM

What is the model/make of the amp?

If the amp can give equal wattage for all channels, I'd say go for it. If not, I would rethink what you are trying to do. You don't really want to mix sub types or wattage differences.

-------------
The Flakman
I feel strange. I have deja vu and amnesia at the same time.

John | Manteca, CA

Posted By: stevdart
Date Posted: August 21, 2006 at 10:58 PM

Rule #1: Don't buy a piece of gear without knowing exactly how you're going to hook it up. But anyway, you have it now. Did you get a manual with it? It would give you instructions and tips on connecting speakers. If not, there is a great help section here on the12volt...over to the left in the blue column. Start with Basics. Pay a lot of attention to Woofer Wiring.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window