Alpine Headunit
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81905
Printed Date: May 20, 2024 at 9:38 AM
Topic: Alpine Headunit
Posted By: dbters
Subject: Alpine Headunit
Date Posted: August 22, 2006 at 6:57 AM
I recently bought a Alpine CDA-9851 Mp3/WMA cd receiver.
After i installed it a set all the bass levels, teble levels, sub levels ect through the head unit using the rotary encoder.
However, when i turend the car off then came back and turned the head unit back on i foun that the settings i had made had been deleted and returned to 0.
Does anyone have any ideas about how to fix the problem?
Any help would be greatly appreciated.
Replies:
Posted By: Velocity Motors
Date Posted: August 22, 2006 at 8:11 AM
Your CONSTANT wire ( YELLOW ) is not attached to constant power rather 12 volt switched. Find a constant 12 volt source and this will fix the problem.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: tcss
Date Posted: August 22, 2006 at 11:22 AM
I agree with Jeff, I would check my constant first, but if it has power I would make sure the "defeat" is not on.
-------------
There is no such thing as free installation!
|