Alpine IVA-W200 DVD Playback Issue
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81992
Printed Date: October 31, 2025 at 6:29 AM
Topic: Alpine IVA-W200 DVD Playback Issue
Posted By: kylewest1320
Subject: Alpine IVA-W200 DVD Playback Issue
Date Posted: August 24, 2006 at 10:57 AM
I have the Alpine IVA-W200 and PXA-H701 Combo, and for some reason when I play a DVD I get absolutely no sound out of my component tweeters. The thing is, with CD's, or Sirius, sounds come out fine (actually awesome) from all my speakers, its just with DVD's. Any insight on this? Thank you
Replies:
Posted By: tcss
Date Posted: August 24, 2006 at 11:43 AM
Try going from "output 1" to "output 2" on the PXA-H701.
-------------
There is no such thing as free installation!
Posted By: kylewest1320
Date Posted: August 24, 2006 at 11:52 AM
tcss]T wrote:
y going from "output 1" to "output 2" on the PXA-H701.
On the RCA's output to the amps?
Posted By: tcss
Date Posted: August 24, 2006 at 11:54 AM
Yes
-------------
There is no such thing as free installation!
Posted By: kylewest1320
Date Posted: August 24, 2006 at 12:06 PM
Ok, will try that in a few, thanks for the tip.
Posted By: tcss
Date Posted: August 24, 2006 at 12:16 PM
Let me know if it works, we had the same issue in our display board.
-------------
There is no such thing as free installation!
Posted By: kylewest1320
Date Posted: August 24, 2006 at 1:30 PM
Well I figured out that I had the rear inputs to the amps in the front ouput off the processor, so now I at least get sound out of my tweeters, but its very low. I think I just need some time to fully tune them. I have another question for you, not sure if you deal with Zapco or not, but I have 2 of their DC Reference Series amps, which are the digital ones, they have built in x-overs, eq's, etc. Do you think I should run the x-over's and eq off the Alpine or use the Zapco? Thanks for all your input
Posted By: tcss
Date Posted: August 24, 2006 at 1:39 PM
Two schools of thought here. My sales manager has a D-310 with the H-701 and he's a real tweek. He uses the X-overs in the 701 because he will adjust the X-over points for differant sources. Like I said, a REAL tweek. Myself, I use the X-overs on my JL amps because I think they sound better then the ones in the 701. See if you can hear a differance, if not use the ones in the 701.
-------------
There is no such thing as free installation!
Posted By: kylewest1320
Date Posted: August 24, 2006 at 1:46 PM
Thanks man, really appreciate it.....
|