2002 Dakota, Avic-n1

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82452
Printed Date: May 14, 2024 at 9:45 AM

Topic: 2002 Dakota, Avic-n1

Posted By: Two_Cold
Subject: 2002 Dakota, Avic-n1
Date Posted: September 04, 2006 at 2:05 AM

I am putting an AVIC-N1 in a 2002 Dakota. Can someone explain how I go about triggering the factory amp?

How is it normally done? Also can anyone confirm the amp trigger wire color too?

Any help is appreciated.

Replies:

Posted By: Two_Cold
Date Posted: September 04, 2006 at 8:03 PM

Find the factory blue wire, that is the amp trigger. Wire it to the accessory power (+'ve) and the amp will turn on with the ignition.

Posted By: Two_Cold
Date Posted: September 04, 2006 at 8:03 PM

Thanks, much appreciated.

Posted By: jvillefinest
Date Posted: September 05, 2006 at 9:01 AM

WOW....did you just answer your own question....or am i that tired?

-------------
2007 Acura TSX
SQ setup in the works

Print Page | Close Window