box building site?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82687
Printed Date: May 10, 2025 at 8:32 PM
Topic: box building site?
Posted By: lowfront
Subject: box building site?
Date Posted: September 10, 2006 at 8:52 AM
https://www.klausaudio.com/caraudio/subwoofer_boxes/customize.cfm?productid=13
what do you guys think of somthing like this. Just sending them the measurments and having them do it?
Or should I just do it I'm for some reason kind of nervous about the box build
Replies:
Posted By: austincustoms
Date Posted: September 10, 2006 at 9:40 AM
Build your own, those look cheap. It's cheaper to build your own anyways. Just read everything you can about it on this site.
Posted By: kfr01
Date Posted: September 10, 2006 at 9:57 AM
lowfront:
Building a square box couldn't be easier or cheaper.
Buy sheet of MDF, lots of glue, a few clamps.
Shoot, Home Depot will sometimes even make the cuts for you.
A little bit of planning, and some thoughts about safety, and you'll be fine!
-------------
New Project: 2003 Pathfinder
|