Print Page | Close Window

enclosure for F150

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82698
Printed Date: May 12, 2025 at 9:21 PM


Topic: enclosure for F150

Posted By: jweld97
Subject: enclosure for F150
Date Posted: September 10, 2006 at 3:12 PM

I have a 2000 F150 extended cab that I would like to put my Krank10 sub into, but I don't want to lose the functionality of the rear seats. Does anyone have any ideas as to how I could do this? I don't know the specs of the sub as it was an insurance replacement from about 10 years ago. A box would fit under the seats, but I'm not sure as to dimensions it should be, ported, sealed?  Any input would be helpful. Thanx.



Replies:

Posted By: Bmnicolosi
Date Posted: September 10, 2006 at 11:01 PM
check out proboxrocks.com

-------------
If you say "I already know how", don't ask me a single question.



Posted By: mario_wireless
Date Posted: September 11, 2006 at 1:54 AM

i have a 200 ford f-150 ext-cab and i bout a pre-fab box off of ebay. it works great. here is a link to what you need:

https://cgi.ebay.com/Ford-F150-ext-cab-99-03-Dual-10-downfire-speaker-box_W0QQitemZ120029351695QQihZ002QQcategoryZ14945QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item120029351695

hope this helps.



-------------
Mario



Posted By: xtremej
Date Posted: September 11, 2006 at 8:17 AM
Check these guys out, I have installed sold and installed many of there boxes. High quality and reasonably priced. Beware of purchasing boxes on ebay as I have seen a few and they were a sad joke, 1/4" mdf, carpeting falling off etc......

-------------



Posted By: stormraider04
Date Posted: September 11, 2006 at 3:32 PM

i have a 02 f-150 ext cab. im putting two 10s under the seat in a custom box that im making.

i got a seat lift kit from here. https://www.lmiwelding.com/kits_supercab.htm

the seat lift kit gives you more options. i only got the 2inch lift and i have about .96 cuFt per sub. if you want to get a premade box there is probox which has a linex texture put on it. and then there is supercrewsound.com i believe.




Posted By: jweld97
Date Posted: September 11, 2006 at 11:12 PM
Thank you all so much for your replies. I appreciate the input.


Print Page | Close Window