2 12w7’s with P.A. tt2250d

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83123
Printed Date: June 13, 2024 at 4:45 AM

Topic: 2 12w7’s with P.A. tt2250d

Posted By: bdgf2004
Subject: 2 12w7’s with P.A. tt2250d
Date Posted: September 19, 2006 at 10:36 PM

I was running 2 15" cvr's in a sealed 5cft box on my tt2250d and it was pretty loud but I kept having problems with my subs.So I bought 2 12w7's put them in a sealed 4 cft box, and it souds pretty damn good for some 12's but I was hoping for louder. I hits low like the 15's but with a lot better sound quality. If I were to build a ported enclosure should these 12's be able to hang with the 15's?

I'm using the same amp, but when I was running the 15's it was on a 1 ohm load. Now with the 12's it's on a 1.5 ohm load (less Power).

I'm in a 91 dodge shadow (4 door hatch back)

Any input would be greatly appreciated.

Replies:

Posted By: aznboi3644
Date Posted: September 19, 2006 at 11:36 PM

In a properly designed and built enclosure...yes

Posted By: bdgf2004
Date Posted: September 21, 2006 at 4:27 PM

I'm assuming you mean a ported enclosure. I have WINisd, I used to have BassBox Pro but lost the disk when I moved. Should WINisd do? I was thinking of building a box with interchangeable ports, so if I don't get it quit right the first time all I have to do is build a new port.

Posted By: aznboi3644
Date Posted: September 21, 2006 at 5:34 PM

WinISD is great...read the "how to use WinISD" sticky