Print Page | Close Window

Alpine CVA-1004 Set up

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83449
Printed Date: May 13, 2025 at 6:32 PM


Topic: Alpine CVA-1004 Set up

Posted By: bbay
Subject: Alpine CVA-1004 Set up
Date Posted: September 28, 2006 at 11:58 AM

All:

I am moving my CVA-1004 head unit, NVE-N851A nav, CHA-S634 CD changer into my new(est) car. I bought a Pac 7 trigger for video bypass service. After installation, I am unable to access the 'set-up' screen. The disclaimer screen does not clear with pushing 'enter' on remote. I removed the Pac7 bypass and tried to connect the hand brake and foot brake leads on the heat unit and nav unit, but it is not clear in the manuals whether they are looking for 12VDC or ground. I have re-booted the head unit per manual, but no luck. Any advise out there? Much Thanks BB



-------------
BB



Replies:

Posted By: i am an idiot
Date Posted: September 28, 2006 at 9:59 PM

      The parking brake wire  yellow/Blue is looking for ground    and the foot brake yellow/black is looking for +


Print Page | Close Window