Print Page | Close Window

Factory headunit amp hookup

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83706
Printed Date: May 14, 2025 at 1:05 AM


Topic: Factory headunit amp hookup

Posted By: loetz04
Subject: Factory headunit amp hookup
Date Posted: October 04, 2006 at 7:37 PM

i am installing an 800 watt amp and 2 kicker solobarecks in a 2006 f-350 superduty and i wanted to know if anyone could help me i was wondering what i would need to do to hook the amp up to a factory head unit



Replies:

Posted By: tcss
Date Posted: October 04, 2006 at 7:45 PM
Easiest way would be to get a PAC # OEM2 and the proper "C" cable to match your truck. This would create an RCA Y out between the deck and the factory amp. If there is no factory amp , a line output convertor and voltage sensing turn on module will work just fine.

-------------
There is no such thing as free installation!



Posted By: mike12volt
Date Posted: October 09, 2006 at 9:24 PM
Keep in mind that there would be a slight delay of sound between door speakers and subs when turned on.


Print Page | Close Window