Print Page | Close Window

subs, ohm loads, resistors?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83872
Printed Date: May 12, 2025 at 8:17 PM


Topic: subs, ohm loads, resistors?

Posted By: krewltee
Subject: subs, ohm loads, resistors?
Date Posted: October 08, 2006 at 4:50 PM

im often viewing the forums on " the down low" but today i must ask for help:o):////////ok now my delema ..............i have 4 subs dvc 4 ohms per coil .....i normally run a single mono amp @ 2 ohm on the 4 subs but reccently blew it up ,now i put a kicker 2 channnel amp that wont hold 2 ohms bridged......if i recall correctly someone once said could drop the loads with the use of resistors / if so can someone please enlighten me!



-------------
KREWL INTENTIONS C.C
ROCHESTER N.Y



Replies:

Posted By: cloak559
Date Posted: October 08, 2006 at 5:05 PM
Either wire it at 8ohms, or buy a new amp....

-------------
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz

Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...




Posted By: krewltee
Date Posted: October 08, 2006 at 5:39 PM

thanx but  thats no help!posted_image



-------------
KREWL INTENTIONS C.C
ROCHESTER N.Y




Posted By: cloak559
Date Posted: October 08, 2006 at 5:49 PM
Basically, I was saying that you cannot use resistors to change the ohm load. The resistor would be consuming power from your amp, so you would only get about 1/2 the power to your subs...

Like I said... 8ohms, or new amp...posted_image

-------------
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz

Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...




Posted By: krewltee
Date Posted: October 08, 2006 at 5:59 PM
i think ill try 1 ohm per chhannl and see how long before the amp frysposted_image thanx homie

-------------
KREWL INTENTIONS C.C
ROCHESTER N.Y




Posted By: aznboi3644
Date Posted: October 08, 2006 at 6:15 PM
How about instead of frying that amp you sell it and buy a new mono amp





Print Page | Close Window