Print Page | Close Window

Kenwood Excelon 701 and PAC OEM-2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84010
Printed Date: May 13, 2025 at 8:58 AM


Topic: Kenwood Excelon 701 and PAC OEM-2

Posted By: meh66
Subject: Kenwood Excelon 701 and PAC OEM-2
Date Posted: October 11, 2006 at 12:36 PM

I installed a Kenwood Excelon DPX 701 in a customer's vehicle. This was installed in a 2003 Nissan Xterra. This vehicle has a factory amp, hence the purpose of the PAC-OEM-2 adapter. The customer is complaining about a loose wire sound coming from the right front speaker. I have a good feeling it is not a loose wire, but I do recall having to  mess with the harness a few times in order for me to get the head unit to seat propery....maybe it is pinching somewhere.  Any ideas would be much appreciated.

-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"



Replies:

Posted By: meh66
Date Posted: October 16, 2006 at 6:50 AM

FYI

The problem was intermittent static and it was coming from the RCA cables coming out of the PAC unit touching a metal surface. Lesson learned was to insure the unused RCA cable is insulated.



-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"


Print Page | Close Window