Clarion PM-2308U-A, wiring diagram needed

Hi, basically just after a pinout/wiring diagram for a Clarion PM-2308U-A cd headunit. Its a factory HU, not sure which car it was made for though.
Any help appreciated.

thanks.

See if it uses a Nissan harness. I know some older Nissan radios had a Clarion sticker on them.

-------------
My ex once told me I have a perfect face for radio.

You mean check to see if a nissan harness attaches to it?
the problem is it doesnt have any wires at the back, only the pin socket, thats why i need to find out which pin does what.

thanks again.

Exactly. Have a look on www.installdr.com and see if a Nissan harness is what you need.

-------------
My ex once told me I have a perfect face for radio.

lol, ok im not understanding your answer.
You want me to check out the nissan wire harness, which will connect to a HU's cable and then fit perfectly into a nissan car...Now that harness usually has something to connect to, except this HU has no cable/wires/connector on the back for me to match up any colors or anything. The wiring which is usually attached to a HU, that then attaches to a cars wiring harness is missing.
so can you explain to me why/how in abit more detail :)

No, I want you to look and see if a Nissan harness will plug directly into the back of your radio.

Look at the plug on the back of your radio and see if it matches up with one on the above website. If it does, you can get a reverse harness from a company like metra, or scosche, etc. to use to wire it up. These harnesses will be noted as into factory radio, and have the standard color codes as the new aftermarket radios. Alternatively, if you find the pinout online (such as www.installdr.com), you can go to a junkyard, cut off a harness, and wire it up.

-------------
My ex once told me I have a perfect face for radio.