phoenix gold ZPA 0.5

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84101
Printed Date: May 09, 2025 at 6:21 PM

Topic: phoenix gold ZPA 0.5

Posted By: kickerzx
Subject: phoenix gold ZPA 0.5
Date Posted: October 13, 2006 at 7:02 PM

i`ve had this amp laying around for years no and newer got around to install it. its still unused belive it or not.
now however i`m in the prosess of installing a system in one of my cars now, and figured i would use it to run a sub (maybe 2).
just wondered if anyone had any experience with this amp? there is nothing particular im wondering about. just your thoughts on it, thats all.

Replies:

Posted By: kickerzx
Date Posted: October 16, 2006 at 10:33 AM

lol. well this explains why not even one hit came up with a search.

Posted By: DYohn
Date Posted: October 16, 2006 at 10:46 AM

HERE's your owner's manual for that amp. It is apparently bridgeable into a 1-ohm load.

-------------
Support the12volt.com

Posted By: smgreen20
Date Posted: October 16, 2006 at 9:46 PM

I have a ZPA0.3 modified and a ZPA0.5, both white, in my set up. Love them both. Heller amps. If you modify yours, you can only go to 2 ohms mono but it'll do @ 1600wrms X 1 @ 2 ohms. My ZPA0.3 did just over 900 wrms. Here's my install. www.carstereo.com/smgreen20

Posted By: kickerzx
Date Posted: October 17, 2006 at 2:16 PM

pretty cool install you got there! my compliments posted_image

Print Page | Close Window