Print Page | Close Window

How to connect 2 amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84411
Printed Date: May 13, 2025 at 6:27 PM


Topic: How to connect 2 amps

Posted By: 5treetracer
Subject: How to connect 2 amps
Date Posted: October 21, 2006 at 7:14 AM

Hi

Ive got one - 4 channel amp,  connected on it one sub  and 2 component speakers,

I want to put my other 4 channel amp for my 7x10 speakers but the problem is I dont know how to connect RCA cable from the dvd player . iv got  front and back rca outs. connected to the 1st amp.

iv bought power distribution block for the power cable.




Replies:

Posted By: Velocity Motors
Date Posted: October 21, 2006 at 9:46 AM
What kind of amps are these. Some amps have pass through RCA's so you don't have to run another set from the deck. If the amp doesn't have these pass through RCA output, then use "Y" adaptor cables ( female to male )

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: 5treetracer
Date Posted: October 21, 2006 at 9:57 AM

one of them is blaupnkt gta 400

i will try Y cable thank You very much :)


Print Page | Close Window