Print Page | Close Window

cobalt/pursuit

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84750
Printed Date: May 10, 2025 at 1:52 AM


Topic: cobalt/pursuit

Posted By: theronsmith
Subject: cobalt/pursuit
Date Posted: October 27, 2006 at 8:41 PM

Does anyone know if the new cobalts or pursuit need's a data retention module?

-------------
chevy II



Replies:

Posted By: Velocity Motors
Date Posted: October 28, 2006 at 8:21 AM

Yes the vehicles you listed does need one to retain the door chime but that is about all. I have done a few of them for Cobalts and Pursuits where I used the normal harness and rearranged the pinouts on the non-data harness to match the data harness pinsouts. Also, you may or may not need this as well :

https://www.scosche.com/scosche_caraudio.aspx?ItemID=GM1593B&CategoryID=5

I have not seen these yet on any Canadian version Cobalts and Pursuits, but that doesn't mean that they're not out there.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window