split area or shared area box?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85036
Printed Date: May 03, 2024 at 7:38 AM
Topic: split area or shared area box?
Posted By: wildchildbmx6
Subject: split area or shared area box?
Date Posted: November 02, 2006 at 7:17 PM
im running two 15 inch subs in a 7.5 ft^3 box and i want to know if i should split the area of the box into two, one for each sub, or should i keep it shared area? i want to go with spl. the box will be ported and tuned to about 40-45 hz. thanks for the help
Replies:
Posted By: aznboi3644
Date Posted: November 02, 2006 at 8:31 PM
I would keep it a common chambor box with a lot of port area...but thats only my opinion....but I would brace it good inside though
I know many others will say to divide it...well lets wait and see
Posted By: wildchildbmx6
Date Posted: November 03, 2006 at 2:48 PM
i want to do whatever will make it hit harder
Posted By: 1lowgalant
Date Posted: November 03, 2006 at 4:06 PM
i think it's really a personal preferance. personally, i like a divided box but a common chambered box can do well depending on the application. as for spl, box tuning and bracing is most important.
-------------
Whatever you do, DO NOT let the white smoke leak out of the wires.....
|