Hello all
This is a pretty simple question,
Do i need a mounting kit when installing a new HU on a ford Escort??
I know its a Single Din opening,but i also think its oversized as well
just looking for some feedback on this thanks,
A kit is not necessary but I believe it looks better if you at least put a 1/4" trim ring around the opening and this is generally cheaper than the whole kit.
-------------
2008 Scion xB
Pioneer AVIC-D3
RF 3Sixty.2 sound processor
Stock speakers (for now ;))
Thanks for the reply
Do you think i'll really need to buy this,i think itis the LX she has
https://www.crutchfield.com/S-08pN4bVQpgu/cgi-bin/ProdView.asp?i=142C4FDK5&tab=morephotos&s=0&cc=01&g=751#morephotos
I can still bypass the factory amp right with out this
Off hand I can't remember any escorts that need the amp integration harness, the escort was a lower car model and as such didn't have amplified systems so the normal ford harness with the long black and long grey plugs should be the one you need, Metra and scosche both sell a version and any car install place should have it.
-------------
2008 Scion xB
Pioneer AVIC-D3
RF 3Sixty.2 sound processor
Stock speakers (for now ;))
ferretvw wrote:
Off hand I can't remember any escorts that need the amp integration harness, the escort was a lower car model and as such didn't have amplified systems so the normal ford harness with the long black and long grey plugs should be the one you need, Metra and scosche both sell a version and any car install place should have it.
Really because if you go to crutchfield and go what fits my car
it has list and says am/fm tape deck with amplifer
Im just going to wire it up like i usally do and see what happens,she still will need to buy that little kit unless i can get some a sheet of abs plastic.
thanks for your help