Print Page | Close Window

Factory amplifier

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85169
Printed Date: May 10, 2025 at 9:45 AM


Topic: Factory amplifier

Posted By: zeus911
Subject: Factory amplifier
Date Posted: November 05, 2006 at 3:23 PM

Does anyone have the correcrt wiring diagram for the factory amplifier in a 1992 mustang GT with six speakers?



Replies:

Posted By: master5
Date Posted: November 05, 2006 at 4:07 PM

I don't have a diagram for that but you really don't need one on those.

They make an integration harness for that but..I reccomend to bypass it, and most likely you are asking because someone butchered the harness anyhow.

Follow the harness at your dash..they are clipped to things behind the dash but pull them off and keep tracing it. Eventually you will get to the factory bypass, which is standard ford plug harness, standard ford color code. The amp itself is located behind the console, you can just leave it there or remove it (need to move the console as well to get to it.)

The good news is that most likely this secondary harness hasn't been cut off and otherwise hacked up. 

Bypassing that amp will sound better, be more reliable and simplify the install.



-------------


Print Page | Close Window