WinISD and Eclipse 8712

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85263
Printed Date: May 09, 2025 at 5:51 AM

Topic: WinISD and Eclipse 8712

Posted By: Flakman
Subject: WinISD and Eclipse 8712
Date Posted: November 06, 2006 at 10:17 PM

I'm plotting the 8712 in WinISD for a ported box. WinISD is tuning the box down to about 21Hz. That seems awfully low. Is this okay to use? If I try to tune it higher the curve just spikes drastically at about 38-40Hz.

Thanks

-------------
The Flakman
I feel strange. I have deja vu and amnesia at the same time.

John | Manteca, CA

Replies:

Posted By: forbidden
Date Posted: November 06, 2006 at 11:47 PM

This sub is just not too happy in a ported box. IIRC it was desinged around a sealed enclosure of 1.5 cubic feet gross volume.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: Flakman
Date Posted: November 07, 2006 at 11:11 PM

Thanks...I'll keep it in the sealed enclosure.

-------------
The Flakman
I feel strange. I have deja vu and amnesia at the same time.

John | Manteca, CA

Print Page | Close Window