Box Design, alpine type r 10

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85280
Printed Date: May 17, 2025 at 3:22 AM

Topic: Box Design, alpine type r 10

Posted By: sean 371
Subject: Box Design, alpine type r 10
Date Posted: November 07, 2006 at 11:01 AM

I plan on buying a new truck in the next few months, and of course that means I get to plan out a new system! :D

I'm considering building a trick center console built around a bandpass box for an alpine type r 10. However, I don't trust myself with WinISD enough to get the chamber and port volumes correct. So if anyone here would be willing to help me out with the volumes for either a 4th order or a series tuned 6th order bandpass, that'd be awesome!! I plan on tuning it around 32hz.

Thanks in advance guys!

Replies:

Posted By: stevdart
Date Posted: November 07, 2006 at 6:50 PM

Post again after you get the truck.

posted_image

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: 1lowgalant
Date Posted: November 07, 2006 at 7:36 PM

a 10" tuned to 32Hz?!?!? that's kinda low for a 10", don't you think? well, IMO it is anyway.

-------------
Whatever you do, DO NOT let the white smoke leak out of the wires.....

Posted By: jonathancullen
Date Posted: November 08, 2006 at 2:14 PM

i would shoot for around 38~40Hz with a type r. do you want plans for the box?? if so how much room do you have in between the seats. (thats what im guessing your doin since you said a center councle.) need more info then 32hz to build a box man

Posted By: sean 371
Date Posted: November 08, 2006 at 3:16 PM

Haha this is true sorry. I'll repost once I make up my mind and actually buy the truck/components.