Print Page | Close Window

2 dvc 4 ohm coil 2 ohm load

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85408
Printed Date: April 25, 2024 at 5:06 AM


Topic: 2 dvc 4 ohm coil 2 ohm load

Posted By: sri3850341
Subject: 2 dvc 4 ohm coil 2 ohm load
Date Posted: November 09, 2006 at 10:41 PM

i just got my phoenix gold rsd 1200.1 amp is only 2 ohm stable i have 2 pioneer w306 dvc 12"4 ohm coils is it possible to wire for a 2 ohm load? only options i see are either 2 ohm or 8 ohm load for one sub.is there a way to wire 2 dvc subs with 4 ohm coils to be 2 ohm or do i need to buy new subs now to get full potential from amp...

                                                            shane

                    




Replies:

Posted By: KarTuneMan
Date Posted: November 09, 2006 at 10:51 PM
Option 1 (parallel/parallel) = 1 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1 ohm mono
posted_image
 
Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono
posted_image
You have 2 options....OR get new subs.

-------------



Posted By: sri3850341
Date Posted: November 09, 2006 at 10:53 PM
that sucks


Print Page | Close Window