best wiring, ts-w3002spl 12'', prs-d3000spl
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85728
Printed Date: April 29, 2024 at 8:53 PM
Topic: best wiring, ts-w3002spl 12'', prs-d3000spl
Posted By: boomboomtruck
Subject: best wiring, ts-w3002spl 12'', prs-d3000spl
Date Posted: November 16, 2006 at 4:36 PM
I am soon to be getting 2 pioneer premier ts-w3002spl 12'' subs and a prs-d3006spl amp and what is the best wiring for this i want max performance out of it also in 1987 blazer i am putting the ts-c720prs component speakers in front and how do i wire them up? also what is the best speaker wire for them?
Replies:
Posted By: boomboomtruck
Date Posted: November 16, 2006 at 4:37 PM
the amp should say prs-3000spl instead of 3006
Posted By: boomboomtruck
Date Posted: November 16, 2006 at 6:09 PM
i have been looking at the Scosche EFX wiring and it was used on the pioneer f-250 and it seems to be pretty good wiring, does anybody have experience with it?
Posted By: stevdart
Date Posted: November 16, 2006 at 10:36 PM
It's difficult to find info for Pioneer on the web, so look at the wiring diagrams shown in your user manual. See if you can wire those subs up for a total 2 ohm impedance, and connect them to a mono amp. Buy a separate stereo amp for the components. Use common 16 gauge speaker wire; or if you are going for looks, use a fatter wire to the subs. Speaker wiring does not have to be brand name.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: aznboi3644
Date Posted: November 16, 2006 at 11:48 PM
I have KnuKonceptz wiring and its awesome...um you could go to Rural King or any welding supply store and get some 2 gauge copper welding cable...exact same thing as power wire...cept no fancy crap here all work...no silver plating or colory insulating.
|