Print Page | Close Window

Sub & Amp compatibility

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8574
Printed Date: August 01, 2025 at 11:47 AM


Topic: Sub & Amp compatibility

Posted By: 1997AvengerES
Subject: Sub & Amp compatibility
Date Posted: January 25, 2003 at 3:01 PM

I was wondering If I had 2 of the

OV2-1200'sposted_image

wired to a single

MOFO-12
• 2400 watts power handling
• 270 oz. magnet
• 3” BASV/Kapton Hybrid 18 AWG
Voice Coil
• SPL 90 dB
• Sealed box: N/A
• Ported box: 2.4 cu..Ft.
• Tuning: 40 Hz
• Port size: 3”(dia)x8.75”(length)
• # of ports: 2

if It would sound good if the amps are both 2 ohm stable and the sub has dual 1 Ohm Voice coils

any comments would help alot THX



-------------
|||||||1997 Doge Avenger ES was here|||||||



Replies:

Posted By: fakepete
Date Posted: January 25, 2003 at 7:38 PM
If the amps are only 2ohm stable then you cannot connect them to a 1 ohm load.  The other possibilities are only use one amp and wire the VC's in series, or find two one ohm stable amps.


Print Page | Close Window