Bridging amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8609
Printed Date: May 29, 2024 at 5:38 AM
Topic: Bridging amp
Posted By: TruckFan
Subject: Bridging amp
Date Posted: January 26, 2003 at 12:56 PM
Hi, i just installed a 25 x 4 RMS amp to push my infinity 5 x 7's. It seems as if the speakers are requiring more power. If i bridge the amp and run the speakers in parallel then that would drop the amp to 2 ohms and give me twice as much power to each speaker right? Any input is appreciated. Thanks Guys
Replies:
Posted By: Velocity Motors
Date Posted: January 26, 2003 at 6:33 PM
Yes this is correct but you will loose your left right balance.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: zargon
Date Posted: January 27, 2003 at 7:31 PM
bridge one 5x7 to each side of the amp many amps will bridge and only use the left input to run , if this is the case you will keep your left to right balance.
-------------
zargon ruler of estranorth
|