Print Page | Close Window

Sub Wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86121
Printed Date: July 02, 2025 at 4:51 PM


Topic: Sub Wiring

Posted By: Yelloweg
Subject: Sub Wiring
Date Posted: November 24, 2006 at 11:48 AM

Option 1 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono
posted_image
 
Just a quick question, if i wire my subs up like this and hook them to an amp that's good for 1000W RMS @ 2ohms, would i be showing each sub 500W or 1000W.  I'm pretty sure it would be 500W, i just wanted to check.  Thanks in advance for any replies.



Replies:

Posted By: aznboi3644
Date Posted: November 24, 2006 at 12:32 PM
If the subs have the same voice coil impedance than power is split equally


Print Page | Close Window