Print Page | Close Window

1994 civic front door components help!

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8636
Printed Date: July 22, 2025 at 1:26 PM


Topic: 1994 civic front door components help!

Posted By: company78
Subject: 1994 civic front door components help!
Date Posted: January 26, 2003 at 9:02 PM

hi, im installing kenwood components into a 94 civic, and i was in need of some advice.  i installed the woofer in the door, and i installed the tweeter in the stock part in the door (this car came with stock tweeters in the door)  then i hooked both of the speakers to the crossover, and then i need to hookup the crossover to the amp

my problem is, that i can not run a wire through the door, and i have a stupid wire hanging out of the door jam... it looks kinda stupid, any suggestions or ideas on how i could either:

run the wire through the door (i guess id have to drill holes :\ )

or is there a way to hook up the kenwood tweeter and woofer to the stock wiring... then use the wire that has already been run through the car?

thanks for any help :)




Replies:

Posted By: Velocity Motors
Date Posted: January 27, 2003 at 8:20 AM
You can use the stock wiring as your input signal to the crossover, but you will then need to mount the crossover in the door. Otherwise if you wish to have the crossover in the car somewhere, you will need to run the new wire through the door boot or drill a new hole.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window