crossover, Orion P6.2 components
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86529
Printed Date: April 28, 2024 at 9:34 AM
Topic: crossover, Orion P6.2 components
Posted By: erickbkny28
Subject: crossover, Orion P6.2 components
Date Posted: December 02, 2006 at 12:48 PM
i just purchased Orion P6.2 component speakers. I'm looking at the crossover and I'm alittle lost.... It has a tweeter input and subwoofer input on one side.....and a tweeter output and subwoofer output on the other side...I'm not really sure how to conect them...can someone please explain...thank you
Replies:
Posted By: geepherder
Date Posted: December 02, 2006 at 5:49 PM
I'm not familiar with those Orions, but I know some Boston components have internal jumper wires you connect, then you only have to feed signal to one input. Check to see if your set is similar. I found a manual online for your speakers, but it mentioned nothing about this.
-------------
My ex once told me I have a perfect face for radio.
Posted By: colaroaster
Date Posted: December 02, 2006 at 10:48 PM
sounds like the crossovers are bi-ampable. did the speakers not come with a manual?
|