pioneer deh 245 wiring

Got a pioneer deh 245 hi power supertuner 35x4 do not have harness for it need to know what prongs in the back are for what or any good ideas to work around not having the harness for it.

you could try circuit city. When I used to work there we used quick connect harnesses from metra for the installs and we left the harness that came in the box in the cabinets. If you asked nicely maybe they would give you one. Just a thought.

Anybody know any other ways to determine what colors go to what promgs on the unit without the harness

Yeah, circuit should have one, or they might (or any other shop for that matter) have one lying around that you could easily pick up for free or close to it. You can always find it on ebay too. Just the other day I had a typo on there and found a 13 year old jar of mayo selling for $7+ shipping, LOL. There should be a pinout diagram on the underside of the radio showing which pins are what if you have to solder on to em


-------------
RTFM

I agree with the others- do it right and get a harness. In order to figure out the pins without a schematic/pinout handy, you'd have to disassemble the unit, and have a good understanding of how it works (which I don't), along with the right test equipment. Even then, if you got the unit to power up, it'd still be trial-and-error to get the speakers right.

-------------
My ex once told me I have a perfect face for radio.

Thanks to all who are trying to help me. Unfortunately, I live in the middle of nowhere, it's called French Lick, In. one hour and a half any direction to a city.
Will make some calls. Any other ideas still appreciated.

           Thanks again, Robert

You should be able to order a harness from Pacific Coast Parts delivered to your doorstep. It may be more expensive than going through Metra, but it's sure convenient. Check it out: https://www.pacparts.com/.

-------------
My ex once told me I have a perfect face for radio.

At pacparts For forty bucks and shipping it should be handy. Couldnt even find it at metra. This unit was given to me it works or did when removed. But i dont want to have to pay forty bucks to find out it dont.
The conector at the back of this pioneer deh 245 is rectangular
with 12 pins two rows of 6 on top of each other the catch clip would be at the top when looking at the unit from the rear. any other ideas folks out there?
Robert

Try ebay, I found a listing on there for your radio for $5.99 + 3.89 shipping for that harness. You could also try and email pioneer and ask them for a digram.

40 bucks is mighty steep. Ebay is definitely an option. I don't usually recommend it for electronics, but it's only a wiring harness. Also, I don't think you'll find one on Metra's website, but it should be in the Metra book at a dealer near you (Sounds like a commercial or something, huh?).

-------------
My ex once told me I have a perfect face for radio.