Print Page | Close Window

Aux in, 2007 Ford Escape Audiophile?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87181
Printed Date: May 14, 2024 at 11:28 AM


Topic: Aux in, 2007 Ford Escape Audiophile?

Posted By: jfkaiser
Subject: Aux in, 2007 Ford Escape Audiophile?
Date Posted: December 14, 2006 at 8:12 AM

Hi Guys,

My friend recently purchased a 2007 Ford Escape with an Audiophile sound system that DOES have "SAT ready".

It does NOT have the NAV system in it.

1. Does PIE make an AUX IN connector for this thing?
2. Does anyone have the wiring diagram so I can see if it is a 20 PIN single connector or two separate connectors?

Thx,
Jon



Replies:

Posted By: dtuffy
Date Posted: January 02, 2007 at 3:56 PM
I am interested in finding out as well.. Have the same vehicle and unable to find anything about online...
Wanting to hookup an ipod to non-nav, sat/ipod ready audiphile system.




Posted By: Velocity Motors
Date Posted: January 02, 2007 at 5:08 PM
I installed the Pie FRD04-AUX into a 2007 Ford F150 and it worked like a charm. Very basic with only (+) & (-) to connect to the OEM HU. All you have to do is call your Ford dealer and ask them for a interface module for your application and they will tell you if there's one available or not. If there is chances are it's the PIE module and just ask for the part number to see if it matches the FRD04-AUX.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: jfkaiser
Date Posted: January 03, 2007 at 7:52 AM
Thanks Jeff,

I will check this out.

Jon




Posted By: another-kelly
Date Posted: January 03, 2007 at 12:09 PM
i looked on perpheral's site yesterday for something like this on an '07 Escape (non-audiophile). the only listed as having them upto '04. oh well, install is done




Posted By: jfkaiser
Date Posted: January 03, 2007 at 2:06 PM
Hi,

So which part number did you end up installing that did work for you??

Thx,
Jon





Print Page | Close Window