Print Page | Close Window

speaker enclosure

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87426
Printed Date: May 13, 2025 at 8:36 AM


Topic: speaker enclosure

Posted By: sikcness
Subject: speaker enclosure
Date Posted: December 18, 2006 at 5:37 PM

posted_image

does it mess up the airflow to have the height go from 13 3/4" to 15"? because the very back of my trunk is only 13 3/4 big... and im making an enclosure for some jl 12w6v2's. recomended height 14"




Replies:

Posted By: splaudio
Date Posted: December 18, 2006 at 6:05 PM
no no problem. i didnt catch is that inside or external meaurments...



Posted By: sikcness
Date Posted: December 18, 2006 at 7:22 PM
anybody know? would it affect the airflow?



Posted By: sikcness
Date Posted: December 18, 2006 at 7:23 PM
thats external measurements



Posted By: sikcness
Date Posted: December 18, 2006 at 8:45 PM
should i post this under fiberglassing or something?



Posted By: stevdart
Date Posted: December 18, 2006 at 9:16 PM
You can make the enclosure any oddball shape that fits the car.  There isn't any airflow to worry about, but be sure to leave a little room behind the driver for voice coil cooling.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Print Page | Close Window