Print Page | Close Window

The bracket on my infinty kappas

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87749
Printed Date: October 30, 2025 at 7:47 PM


Topic: The bracket on my infinty kappas

Posted By: ravesrus19
Subject: The bracket on my infinty kappas
Date Posted: December 25, 2006 at 2:10 AM

I installed my infinity kappas in my door.  Before installation, I removed  a black plastick(what im thinking was a spacer) that fit around the cones of my 6x8's. They were only secured there by a little piece of scotch tape. There were no screw holes to secure it on top of speaker.

Is this a spacer bracket  to pull magnet a little farther from door, and push cone a little closer to the grill of interior door?

thnx



-------------
2005 Ford Ranger, 4 door , stx model



Replies:

Posted By: stevdart
Date Posted: December 25, 2006 at 2:44 AM
See this recent thread:  https://www.the12volt.com/installbay/forum_posts.asp?tid=87673&PN=1

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Print Page | Close Window