Print Page | Close Window

8g instead of speaker wire for subs?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87973
Printed Date: May 01, 2024 at 1:07 PM


Topic: 8g instead of speaker wire for subs?

Posted By: thor81012
Subject: 8g instead of speaker wire for subs?
Date Posted: December 29, 2006 at 2:27 AM

is it possible to use 8g amp power wire instead of normal speaker wire to wire my subs in parallel and then the same wire into my amp will i get more wattage that way or is it not a good thing to do? ........ sorry i have dumb questions about my system but im a newbie and i dont really know too much about this yet im still learning



Replies:

Posted By: geepherder
Date Posted: December 29, 2006 at 6:39 AM
This is perfectly fine. Larger wire is capable of passing more current safely. As long as it's not too big to create headaches hooking it up, go for it. There will be no audible difference.

-------------
My ex once told me I have a perfect face for radio.




Posted By: jeffchilcott
Date Posted: December 29, 2006 at 4:55 PM
I use 8 guage in my projects but thats only because I have measured over 70 amp of current from my amps.

Really 8 guage is overkill for 1000-1500 watts

6000+ is a diffrent story

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place




Posted By: snhtown
Date Posted: December 30, 2006 at 12:42 PM
i've seen people use 8ga wires for speaker wire before, he had 4 rockford hx2 power 15's each being powered with a 2000 watt amp, i fogot what kind but they were huge, kinda like the mojos, but i guess if your going to be handeling lots of power its a good idea...




Posted By: speedwayaudio1
Date Posted: December 30, 2006 at 4:45 PM
I use it for my 8 12's. Not that I need it. It just looked cool. I used spark plug wire looms to hold the wire. I have all my subs inverted and wired to look like engine cylinders.

-------------
Big Dave





Print Page | Close Window