1998 Dodge Durango Amp Power Wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87998
Printed Date: May 12, 2025 at 5:33 AM

Topic: 1998 Dodge Durango Amp Power Wiring

Posted By: myrandex
Subject: 1998 Dodge Durango Amp Power Wiring
Date Posted: December 29, 2006 at 4:05 PM

I am kind of new to installs, but I have helped plenty of times and basically did the install on my Ford F150 by myself and everything turned out sweet. I am attempting to wire my girlfriend's Dodge Durango subs and am having trouble finding a good location to run the Amp's power wire through the firewall. Where do people typically do this? My Ford had more space to work in and it was pretty easy to find a good spot and I was able to easily connect it directly to the Alternator. I don't want to mess anything up so I figured I would ask here before I attempted anything. Thanks for any help,

Jason

Replies:

Posted By: geepherder
Date Posted: December 29, 2006 at 8:26 PM

I know on Rams with automatic there's a piece of plastic bolted in place where the clutch pedal would be. Check to see if the Durango is the same. If it is, you can drill there. Otherwise, you can usually cut a slit in a factory grommet and go right through.

-------------
My ex once told me I have a perfect face for radio.

Posted By: myrandex
Date Posted: December 31, 2006 at 2:00 PM

Thanks I ended up finding a spot where the hood release went through. Now I just have to find the best place to run the RCA's through and then I'm done :)