no output from amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88249
Printed Date: November 03, 2025 at 8:49 PM
Topic: no output from amp
Posted By: smitty93
Subject: no output from amp
Date Posted: January 02, 2007 at 8:41 PM
i bought new speakers for my truck and i have them running directly to my amp but no sound comes out of it, anybody know what could be wrong ------------- Smitty
Replies:
Posted By: haemphyst
Date Posted: January 02, 2007 at 9:18 PM
Is the deck working? How do you know it is or is not? Is the amp working? How do you know it is or is not? Is the wiring to the speakers good? Did you replace the stock wiring, or did you tap into the harness?
Tell us what you have done to troubleshoot, so we can help you. We could suggest things to check all day long, and still never trip across the solution.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: smitty93
Date Posted: January 03, 2007 at 5:12 PM
yes the deck and amp are working i bought brand new wire for my speaker, the speaker wire runs right out of my amp to my speakers that I bought, I was planing to just have the speakers in the back seat or underneith because there is lots of room back there
-------------
Smitty
Posted By: haemphyst
Date Posted: January 03, 2007 at 6:20 PM
OK, that's fine, but again, what have you done to troubleshoot?
How do you KNOW all the components are functioning correctly? Is the amp powering up? Are there any fuses blowing? What deck, amp, and speakers are you trying to install? I can't read your mind, you have to help us out a bit, or we can't help you...
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: specialaudio
Date Posted: January 03, 2007 at 6:40 PM
Check the RCAS, do you have Rcas? is there any input into the amp?
is the amp in troble mode? is it on? do you have a good ground? what kind of amp?
do you have a tigger or REM into the amp?
need more info.... ------------- 93' Cutlass
|