Print Page | Close Window

1999 Mustang Factory Amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88310
Printed Date: April 24, 2024 at 6:32 AM


Topic: 1999 Mustang Factory Amp

Posted By: 700zx
Subject: 1999 Mustang Factory Amp
Date Posted: January 03, 2007 at 8:40 PM

I replaced the head unit and amp in my 1999 Mustang with aftermarket units and now i'm trying to put those factory components in my 1992 Bronco. I don't have all the plugs so i've run into some problems as you'll see...

My bronco has 2 rectangular plugs, one has the 5 wires dealing with power one has the 8 speaker wires going directly to the speakers.    

I have the mustang head unit wired in as the power plug from the bronco plugged directly into my mustang's. This leaves 2 more plug holes in the head unit. I plugged in the speaker relay plug(the one with 8 wires - 2 rows of 4) into the head unit and then into the amp. This leaves the plug of 6 which i don't know what is used for on the head unit. I'm assuming it's not necesary.

The amp now has the 8 speaker wire plug going in, and
nothing more.

I need to know the locations and functions of the pins on the amp. There is a connector with 14 pins, 6 on the top and then 8 on the bottom. The top of the connector has 3 pins, followed by a gap, then 3 more pins.
                 
                 III III
                 IIIIIIII

There is also 6 pin connector which i don't think needs to be used.

If there is anything more i need to know please tell me.   
Any and all help is appreciated! Thank you!



Replies:

Posted By: 3cc_installer
Date Posted: January 04, 2007 at 1:00 AM

https://www.installdr.com/Harnesses/Ford-Wiring.pdf

go to this site.



-------------
Jared Nixon - A.K.A Jsmoke
3rd Coast Customs
Lake Charles, Louisiana




Posted By: 700zx
Date Posted: January 04, 2007 at 4:10 PM
I've read that site and it doesn't tell me anything about the amplifier. I need to know the locations of the pins and their functions. I don't have the factory plugs to match colors either.





Print Page | Close Window