Print Page | Close Window

Best subwoofer out of these choices?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88593
Printed Date: May 21, 2024 at 9:12 PM


Topic: Best subwoofer out of these choices?

Posted By: projectprotege
Subject: Best subwoofer out of these choices?
Date Posted: January 08, 2007 at 5:35 PM

I'm currently at a stand still, I cannot figure out which subs I want. So I was hoping you guys had some input/experience with any of these subs...These will be going into my 96 blazer 2-door BTW.

(1)15" DD 3515d in a 9 cubic foot box ported.

(1)15" TC sounds TC-3000 in a 9 cubic foot box ported.

(2) 12" Image Dynamics IDMAX in a 4-4.5 cubic foot box ported.

As for what I am aiming for, I want something loud as hell for daily driving. So which of these subs get real low and real loud best?

I will be powering them with my RF1000a2 amp.

Sticker on back of the amp states "550Wx2 RMS-1100Wx1 RMS" Birth sheet says 1400 watts RMS @14.67 volts... 

Also, I like to pound the doodie out of my subs, so I need some that will take one hell of a beating, or at least one that has a good warranty if I do blow it. lol




Replies:

Posted By: kirktcashalini
Date Posted: January 08, 2007 at 8:57 PM
holy crap, any one of those is going to be loud as hell in a 2 door blazer. you better be looking into a high output alt, my 99 blazer alt can handle 600 without any dimming (i did do big 3), but when i REALLLY bang hard it does minor dimming (only noticable on interior (dash) lights though.

-------------
99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)




Posted By: projectprotege
Date Posted: January 08, 2007 at 9:19 PM

I'm putting a 180amp alt. along with an optima yellow top, and doing the big3 with 2/0 welding cable, and all my power wire for the system will be 1/0 welding cable.

I'm leaning more towards either the 2 12" IDMAX or the 1 15" DD 3515d. But not sure...





Posted By: aznboi3644
Date Posted: January 08, 2007 at 11:01 PM
DD for sure




Posted By: KarTuneMan
Date Posted: January 10, 2007 at 10:47 PM
DD...........

-------------





Print Page | Close Window